The Stitching Witch My Life Saver Inhaler Case - IN THE HOOP <p>My Life Saver Inhaler Case - IN THE HOOP</p><p>\"This is Not a SHIPPED PRODUCT \"</p><p>hoop size- 130 x 180</p><p>The following file formats are included:<br />PES<br />DST<br />EXP<br />HUS<br />VIP<br />VP3<br />JEF<br />10o<br />XXX</p><p>You do need an Embroidery Machine to complete this project!!:</p><p>Step 1 - Hoop Stabilizer and stitching out placement slip</p><p>Step 2 - Lay vinyl in the hoop and cover all stitch lines</p><p>Step 3- Stitch out Center design</p><p>Step 4 - Take hoop out and tape other vinyl on back of hoop and cover all stitch lines</p><p>Step 5 - Placement holes is the last stitch step</p><p>Step 6 - Remove and trim and add Kamsnap to Inhaler</p><p> The finished size of the case is 6.25 inches tall and 5 inches wide. <br />Inside diameter is about 4.25\". To see if your inhaler will fit, measure the distance around the entire inhaler, it needs to be smaller than 4.\". <br />Fits most inhalers, but as some are unusual sizes, will not fit all. Shown with a Albuterol inhaler.</p><p>Requires to make Inhaler:<br />Vinyl for haler <br />Tearawy Stabilizer<br />Embroidery thread<br />_ Kamsnap Pliers<br />--needs KAMsnaps <br />6 caps<br />3 Males<br />3 Female</p><p>You may use this file to create items for resale, however, you may NOT RESALE, TRADE, ALTER, or SHARE this DIGITAL FILE in any way.</p><p>Due to the nature of this DIGITAL FILE, no refunds will be issued. This listing is NOT for a physical item.</p><p>*****This is a digital file that must be used with an embroidery machine*****<br />This listing includes designs pictured, and each design has multiple hoop sizes!<br />(This version has 1 files formatted to fit the hoop sizes 180 x 130)</p><p>Happy Sewing!</p><p>All designs drawn by Robin Wilds. For custom designs see www.thestitchingwitch.com</p><p>© Robin Wilds 2019</p>
$3.95

Home / Shop

My Life Saver Inhaler Case - IN THE HOOP

$3.95
My Life Saver Inhaler Case - IN THE HOOP
My Life Saver Inhaler Case - IN THE HOOP
My Life Saver Inhaler Case - IN THE HOOP
My Life Saver Inhaler Case - IN THE HOOP
My Life Saver Inhaler Case - IN THE HOOP
My Life Saver Inhaler Case - IN THE HOOP
My Life Saver Inhaler Case - IN THE HOOP
My Life Saver Inhaler Case - IN THE HOOP
My Life Saver Inhaler Case - IN THE HOOP
My Life Saver Inhaler Case - IN THE HOOP

Home / Shop

My Life Saver Inhaler Case - IN THE HOOP

$3.95
Model Number: SWD-190059
Maximum quantity exceeded
Minimum purchase amount of 0 is required
Maximum purchase amount of 0 is allowed
3.950
Manufacturer: The Stitching Witch
Facebook
Twitter
Email
Pinterest
Google+
LinkedIn
MySpace
Digg
Delicious
  • Description

My Life Saver Inhaler Case - IN THE HOOP

"This is Not a SHIPPED PRODUCT "

hoop size- 130 x 180

The following file formats are included:
PES
DST
EXP
HUS
VIP
VP3
JEF
10o
XXX

You do need an Embroidery Machine to complete this project!!:

Step 1 - Hoop Stabilizer and stitching out placement slip

Step 2 - Lay vinyl in the hoop and cover all stitch lines

Step 3- Stitch out Center design

Step 4 - Take hoop out and tape other vinyl on back of hoop and cover all stitch lines

Step 5 - Placement holes is the last stitch step

Step 6 - Remove and trim and add Kamsnap to Inhaler

 The finished size of the case is 6.25 inches tall and 5 inches wide.
Inside diameter is about 4.25". To see if your inhaler will fit, measure the distance around the entire inhaler, it needs to be smaller than 4.".
Fits most inhalers, but as some are unusual sizes, will not fit all. Shown with a Albuterol inhaler.

Requires to make Inhaler:
Vinyl for haler
Tearawy Stabilizer
Embroidery thread
_ Kamsnap Pliers
--needs KAMsnaps
6 caps
3 Males
3 Female

You may use this file to create items for resale, however, you may NOT RESALE, TRADE, ALTER, or SHARE this DIGITAL FILE in any way.

Due to the nature of this DIGITAL FILE, no refunds will be issued. This listing is NOT for a physical item.

*****This is a digital file that must be used with an embroidery machine*****
This listing includes designs pictured, and each design has multiple hoop sizes!
(This version has 1 files formatted to fit the hoop sizes 180 x 130)

Happy Sewing!

All designs drawn by Robin Wilds. For custom designs see www.thestitchingwitch.com

© Robin Wilds 2019

Leave a Reply

Your email address will not be published. Required fields are marked *